Dive Into A New Experience - Setting Up Your New Shower Unit

Book Today



Presented here below you can discover a lot of decent insights regarding How to Install a Direct-to-Stud Shower Enclosure.


How to Install a Shower Enclosure
A successful shower setup calls for careful planning as well as a great deal of job. Most of the times, you will certainly require to do 3 types of tasks: mounting wall surfaces, mounting the plumbing, and completing wall surfaces.

Prep work


To start with, you have to decide on the kind of shower that you desire to install. It is very important to identify whether the selected shower can managing certain systems as well as can manage a safe level of water with the central heating boiler. Most shower units nowadays are created to be adaptable to different water pressures (such as kept warm water and also cool mains).
It is additionally important to take into account the water pressure and the planning of the piping and drainage for the shower

Different Kinds Of Shower Units


  • Push-on Mixer: The tube and also spray parts of the push-on mixer shower unit can be connected to the bathroom faucet as per your requirement, as well as the water temperature can be changed by means of the faucets. Push-on mixers are cheap as well as exceptionally basic to set up. Nonetheless, although the hose pipe connection is easy, it is easily dislodged. Additionally, it is inconvenient to adjust the temperature.

  • Bath/Shower Mixer: The hose and spray of this sort of shower are incorporated with a bathroom mixer faucet, as well as the temperature level can be changed with the bath taps. It is an extremely low-cost option and no extra plumbing is involved. Nevertheless, the bath/shower mixers likewise experience troublesome temperature control options.

  • Guidebook Mixer: The tube and also spray of a hand-operated mixer shower system are a part of the wall device as well as the cold and hot water materials are connected to a single shutoff The temperature level as well as pressure of the water are controlled via either one or a selection of knobs (in much more expensive showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are much more pricey than the formerly mentioned mixers. They additionally call for extra plumbing of cold and hot water supply pipelines.

  • Thermostatic Mixer: The pipe as well as spray of this shower type belong of the wall surface unit and the cold and hot water materials are connected to a solitary valve below too. It is full with an integrated stabiliser to self-adjust the water temperature and to stop it from ending up being too warm. One of the most significant benefits of a thermostatic mixer shower kind consists of practical temperature control. Nonetheless, it is the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary system containing a powerful electric pump that can altering both the water stress as well as temperature level. This kind of shower can be fitted if there is water supply from a cold water tank as well as a warm water cylinder. A power shower makes the adjustment of both pressure and also temperature very easy. On the other hand, it is unsuitable for water heated straight by the shower or where the water is supplied by a mix boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed right into a keys cold water supply and it warms the water electrically. It is essential to keep in mind that for this shower type to be set up, the keys pressure requires to be at least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level as well as stress to be adjusted using a knob. Designs with temperature level stabilisers are better as they continue to be unaffected by various other faucets in other places in use within the home. A significant downside of electric showers is that the control handle just allows for the choice of heats at less stress, or reduced temperatures at a greater pressure. This is troublesome in the winter season when the spray is commonly weak and the mains water is cooler. However, this problem is dealt with in some versions which are available with a winter/summer setup.


  • Approach


    Relying on the sort of shower you wish to set up, the shower head need to either be suited order to avoid its contact with the water in the bath below or the base tray, or it needs to have a check shutoff.
    Prior to starting, it is recommended to note the placements of the shower head and control, and to plan the pipe-work included. In addition, the water drainage system to remove the drainage will certainly need to be planned. Both placements of the wire route and the shower switch will likewise need to be thought about if an immediate or electrical shower device is being mounted.
    Use the instruction guide offered with the shower system to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is essential to cut off the water system. In order to safeguard the pipes, they ought to be provided a waterproof covering and also fitted with separating shutoffs. The pipelines can after that be hidden right into the wall surface and also smudged over to neaten the total look.
    Fit the base tray, shower head, as well as fittings.
    Connect the main shower control to the pipes that will be supplying the water (This may require a female screw thread adapter).
    Reconnect the water supply and also examination the pipes for any kind of leakages, as some might need tightening.
    If you are installing an electrical shower, remember to turn off the power supply prior to making any type of electrical connections. Once these links have actually been made (there must be assistance within the instruction manual), the power supply can be switched back on.

    Readjusting Water Stress to Fit Your Shower


    The cold water storage tank can be raised to a higher height (often just 150mm (6inches)) by installation a solid wooden support under it - potentially composed of struts and also blockboards. If you pick this choice, the main and circulation pipes will certainly likewise have to be elevated to meet the brand-new height of the reservoir.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it should be attached into the power supply in order to operate.

    Piping as well as Drain


    It is best to use 15mm size supply pipes, as well as make the runs to the shower as short and straight as possible so as to maintain maximum stress and also reduce warmth loss. In addition, by reducing the use of arm joints for pipeline corners, you can reduce the resistance in the circulation of the water supply. You can accomplish this by flexing the pipes instead.

    Many Typical Blunders


  • Breaking or ignoring regional code constraints.

  • Utilizing pipelines that are as well tiny.

  • Affixing copper to galvanized without utilizing a brass or dielectric suitable between the two.

  • Not making use of tape or pipe compound at threaded joints.

  • Not leveling your components when installing them.

  • Not installing an air void filling up for fixtures.

  • Reducing supply stub outs as well short to install the shutoff valves onto after the finished wall is in area.

  • Not effectively lining up tubing right into fittings or stop valves. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will certainly create a leakage.).

  • When transforming the water back on in your home, always run the outside hose pipe valve or purge your commodes to hemorrhage dust as well as air from the lines. This debris can create troubles in your sink taps and other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a Freestanding Shower Unit

    I am very taken with How to Install a Shower Enclosure and I am hoping you liked the article. You should take a moment to promote this blog post if you appreciated it. We thank you for reading our article about How to Install a Direct-to-Stud Shower Enclosure.




    Schedule Free Estimate


    Leave a Reply

    Your email address will not be published. Required fields are marked *